查看: 3055|回复: 16
php论坛环境搭建好后如何访问？？
主页是什么？？如何让别人仿问我的网站，要能当服务器用的
你不会吗？
asdde 发表于
你不会吗？
环境是软件一键安装的，，，我会一点
想用自己电脑做服务器别人访问。& &{:soso_e113:}
你的是 自己的电脑 ？ 还是 租的服务器？
你是在本机还是有独立的服务器呀?
域名解析到主机， 主机站点上绑定域名
topvip 发表于
你是在本机还是有独立的服务器呀?
本机啊，，求解答，，能帮忙吗，，加我QQ啊，，& &
本机做服务器,你有独立IP吗?如动态的就麻烦点了
火舞狂龙 发表于
你的是 自己的电脑 ？ 还是 租的服务器？
个人电脑////
Powered by转于&/article/fcb5aff797ec41edaa4a71c4.html
php5.5 做了大量的更新，在与apache搭配的时候如何选择也很有讲究，这里我们以64位 php5.6 和 Apache2.4为例介绍如何配置。
Win7/8 64位
php5.5.6 6位
Apache2.4 64位
php5.5.6 下载链接：http://windows.php.net/download/#php-5.5
推荐 V11 x64，也就是64bit的。
apache2.4，下载链接：/download/
同样是推荐 V11，64位的。
前面提到的V11是微软的一个组件，如果不安装的话会提示&msvcr110.dll丢失。
下载链接：/zh-CN/download/details.aspx?id=30679
请下载64bit的。
根据引导安装V11，这里很简单啦，最后需要重启一次
把下载下来的php解压，在D盘新建文件夹php，把解压出来的文件全部拷贝到 d:\php\.
在系统环境变量PATH中添加 ;D:\D:\php\ext, 重启后生效
把下载下来的Apache压缩包解压，拷贝到d:\Apache24\.
修改D:\Apache24\conf\httpd.conf.
把ServerRoot这行修改为 ServerRoot&"D:\Apache24"， 双引号之间的就是你的apache放置的位置
修改D:\Apache24\conf\httpd.conf.
把DocumentRoot按照下面的内容修改：
DocumentRoot "d:/Apache24/htdocs"
&Directory "d:/Apache24/htdocs"&
把Listen Port修改为：Listen 8080
添加下面几行，增加对php5的支持：
# php5 support
LoadModule php5_module D:/php/php5apache2_4.dll
AddType application/x-httpd-php .php .html .htm
# configure the path to php.ini
PHPIniDir "D:/php"
保存httpd.conf, 重启Apache服务。
小技巧：d:\apache24\bin\httpd.exe -k install, 这句可以把apache添加到系统服务里去。
在浏览器中打开 127.0.0.1:8080, 是不是能看到it works，这说明你的apache已经工作了。
修改D:\Apache24\htdocs\index.html, 添加&?php phpinfo()?&,保存。
在浏览器中打开&127.0.0.1:8080，是不是看到了phpinfo的相关内容，恭喜你，你的php已经跟apache协同工作了！
不要忘记安装V11
请注意你的php和apache路径，注意修改httpd.conf里的内容
php5.5，只能搭配2.4版本以上的apache，如果你用的是主流的2.2版本或其他，敬请升级到2.4版本
阅读(...) 评论()新手教程：如何在本地搭建php环境
对于一个php环境搭建新手来说，怎么样搭建php环境，搭建php环境需要软件进行配置，本地怎么搭建php环境，php环境搭建的几种方式，一困扰着php环境搭建新手们，以下本文从安装php环境对操作系统的选择、php环境搭建的几种方式、安装装准备、php环境配置安装流程与php新手进行详细解说，请看下文。
一、安装php环境对操作系统的选择
分别安装APMServ网页应用服务器、mysql应用管理系统和php服务器，光这些软件还不行，还需要其它相关的软件的扩展，可以根据自己的实际情况进行安装。环境安装对操作系统的选择，请看下面我慢慢道来。
怎么选择网站的操作系统，现在有一个很容易起来争议的话题，许多做站的人，都不知道根据哪些因素选择自己的网站的操作系统，在哪些操作系统下运营这些软件更好。
1、选择网站运营的操作系统
目前使用windows系统是比较多，而linux系统运用比较少，一般情况都是专业人员使用，要根据自身情况进行选择，不过在这里还是建议使用windows系统，因为这是目前最多人使用，而且操作界面也比较熟悉。
2、选择网站开发的操作系统
开发应该在自己开发的时候，选择自己最熟悉的操作系统比较好，如果使用linux系统最好，但是对于不太熟悉该系统的操作人员来说，最好在windows系统进行操作好之后再移到到linux系统进行测试。
二、php环境搭建的几种方式
windows系统下的
一种是LAMP，即为Linux+Apache+MySql+PHP；另一种是WAMP，它是
Windows+Apache+MySql+PHP，这些进行php环境配置最常用。
linux系统下的
PHP_LAMP环境安装，详细安装视频地址：
/u66/v_NTk0MjM1NTE.html
常用整合型
最常见的比如AppServ。而今Zend公司出品了Zend Server（其免费版叫做Zend Server
CE），内部集成了Apache、PHP、Java Bridge、Zend Optimizer、Zend Guard Loader（使能够运行使用Zend
Guard加密的PHP程序）、Zend Data Cache、Zend Debugger、Zend
Framework等，安装时还可以选择安装phpmyadmin、mysql等，还可以使用它提供的管理工具（WEB形式的）来配置PHP，省得手工配置了。
三、安装装准备
不管使得什么样的操作系统进行环境安装php环境，我们都要去下载最新环境配置服务器及最新版本源代码，并且根据自己的实际也情况采用：windows、 red
linux操作系统，假设我们的电脑已经装好以上某一种操作系统，就可以按照下面的步骤进行php环境搭建。要想建议一个最完美的php环境，最好多花一点时间搞好源代码方面，防止一些错误出现。
到官网把最新版本环境配置软件 下载来。
软件名称 下载地址
httpd-2.2.9.tar.gz http://www.apache.org/
mysql-5.0.41.tar.gz /downloads/
php-5.2.6.tar.gz http://www.php.net/downloads.php
phpMyAdmin-3.0.0-rc1-all-languages.tar.gz /
四、php环境配置安装流程
下面以iwebshop商城系统，使用APMServ配置的环境下进行搭建，在windows系统下进行搭建。
把下载好的APMServ，解压好放在本地电脑D盘
把解压好APMServ打开，把环境配置一下。然后启用APMServ服务，再打该文件，找到&www&文件，然后把iwebshop商城系统进行解压，然后把商城系统文件放进APMServ文件里面的&www&文件。（注释：如果APMServ启动不了，很有可能是由于本机电脑80端口挨占用，可以通过命令进行关闭端口，或者自己本机电脑开着迅雷或者运行其它软文占用了80端口，只须要关闭就行了。）
把iwebshop商城系统把图片中的文件全部选中，复制到APMServ文件里面的&www&文件。
注：相关网站建设技巧阅读请移步到频道。
看过本文的人还看过
最新图文推荐
最新专栏文章
大家感兴趣的内容
网友热评的文章Apache和PHP的版本分别为：
httpd-2.4.9-win64-VC11.zip
php-5.6.9-Win32-VC11-x64.zip
下载地址：
php-5.6.9-Win32-VC11-x64
httpd-2.4.9-win64-VC11.zip
本机使用提win7 64位(基本上现在的操作系统都是64位的了)，同时，apache和php的编译器必需是一致。
比如我上面的版本均是VC11。如果一个使用VC9一个是VC11，运行会出错。这点要注意。
将Apache解压到：D:\Program Files\php5.6.9
将php解压到：D:\Program Files\php5.6.9
Apache配置：
打开conf\httpd.conf文件，修改如下：
将所有：c:/apache24替换为：D:/Program Files/Apache24
在&IfModule unixd_module&前面加入：
LoadModule php5_module "D:/Program Files/php5.6.9/php5apache2_4.dll"
PHPIniDir "D:/Program Files/php5.6.9"
AddType application/x-httpd-php .php .html .htm
修改ServerName:
ServerName 127.0.0.1:80
修改Directory:
&Directory /&
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
&/Directory&
注释掉这个Directory:
#&Directory "D:/Program Files/Apache24/htdocs"&
# Possible values for the Options directive are "None", "All",
# or any combination of:
Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important.
Please see
# http://httpd.apache.org/docs/2.4/mod/core.html#options
# for more information.
#Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
AllowOverride FileInfo AuthConfig Limit
#AllowOverride None
# Controls who can get stuff from this server.
#Require all granted
#&/Directory&
加入默认页文件命名：
&IfModule dir_module&
DirectoryIndex index.html index.htm index.php
&/IfModule&
开启虚拟主机：
Include conf/extra/httpd-vhosts.conf
httpd.conf文件所有配置：
# This is the main Apache HTTP server configuration file.
It contains the
# configuration directives that give the server its instructions.
# See &URL:http://httpd.apache.org/docs/2.4/& for detailed information.
# In particular, see
# &URL:http://httpd.apache.org/docs/2.4/mod/directives.html&
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do.
They're here only as hints or reminders.
If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.
If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which httpd.exe is located
# will be used by default.
It is recommended that you always supply
# an explicit drive letter in absolute paths to avoid confusion.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path.
If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used.
If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
ServerRoot "D:/Program Files/Apache24"
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
# Mutex default:logs
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the &VirtualHost&
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule allowmethods_module modules/mod_allowmethods.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_core_module modules/mod_authn_core.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_socache_module modules/mod_authn_socache.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule cache_socache_module modules/mod_cache_socache.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule data_module modules/mod_data.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule dumpio_module modules/mod_dumpio.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule filter_module modules/mod_filter.so
#LoadModule headers_module modules/mod_headers.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
#LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
#LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
#LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
#LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
#LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule lua_module modules/mod_lua.so
#LoadModule macro_module modules/mod_macro.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule remoteip_module modules/mod_remoteip.so
#LoadModule request_module modules/mod_request.so
#LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule rewrite_module modules/mod_rewrite.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
#LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule status_module modules/mod_status.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule unique_id_module modules/mod_unique_id.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule version_module modules/mod_version.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule xml2enc_module modules/mod_xml2enc.so
LoadModule php5_module "D:/Program Files/php5.6.9/php5apache2_4.dll"
PHPIniDir "D:/Program Files/php5.6.9"
AddType application/x-httpd-php .php .html .htm
&IfModule unixd_module&
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User daemon
Group daemon
&/IfModule&
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# &VirtualHost& definition.
These values also provide defaults for
# any &VirtualHost& containers you may define later in the file.
# All of these directives may appear inside &VirtualHost& containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.
This address appears on some server-generated pages, such
# as error documents.
e.g. admin@
ServerAdmin admin@example.com
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
ServerName 127.0.0.1:80
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# &Directory& blocks below.
&Directory /&
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
&/Directory&
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#DocumentRoot "D:/Program Files/Apache24/htdocs"
#&Directory "D:/Program Files/Apache24/htdocs"&
# Possible values for the Options directive are "None", "All",
# or any combination of:
Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important.
Please see
# http://httpd.apache.org/docs/2.4/mod/core.html#options
# for more information.
#Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
AllowOverride FileInfo AuthConfig Limit
#AllowOverride None
# Controls who can get stuff from this server.
#Require all granted
#&/Directory&
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
&IfModule dir_module&
DirectoryIndex index.html index.htm index.php
&/IfModule&
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
&Files ".ht*"&
Require all denied
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a &VirtualHost&
# container, error messages relating to that virtual host will be
# logged here.
If you *do* define an error logfile for a &VirtualHost&
# container, that host's errors will be logged there and not here.
ErrorLog "logs/error.log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
&IfModule log_config_module&
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %&s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %&s %b" common
&IfModule logio_module&
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %&s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
&/IfModule&
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a &VirtualHost&
# container, they will be logged here.
Contrariwise, if you *do*
# define per-&VirtualHost& access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "logs/access.log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "logs/access.log" combined
&/IfModule&
&IfModule alias_module&
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo /bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL.
You will also likely
# need to provide a &Directory& section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "D:/Program Files/Apache24/cgi-bin/"
&/IfModule&
&IfModule cgid_module&
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock cgisock
&/IfModule&
# "D:/Program Files/Apache24/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
&Directory "D:/Program Files/Apache24/cgi-bin"&
AllowOverride None
Options None
Require all granted
&/Directory&
&IfModule mime_module&
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
&/IfModule&
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.
The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 /subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#EnableMMAP off
#EnableSendfile on
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
#Include conf/extra/httpd-autoindex.conf
# Language settings
#Include conf/extra/httpd-languages.conf
# User home directories
#Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
#Include conf/extra/httpd-default.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
&IfModule proxy_html_module&
Include conf/extra/proxy-html.conf
&/IfModule&
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
starting without SSL on platforms with no /dev/random equivalent
but a statically compiled-in mod_ssl.
&IfModule ssl_module&
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
&/IfModule&
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#&IfModule setenvif_module&
#BrowserMatch "MSIE 10.0;" bad_DNT
#&/IfModule&
#&IfModule headers_module&
#RequestHeader unset DNT env=bad_DNT
#&/IfModule&
打开conf\extra\httpd-vhosts.conf文件:
# Virtual Hosts
# Required modules: mod_log_config
# If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
# Please see the documentation at
# &URL:http://httpd.apache.org/docs/2.4/vhosts/&
# for further details before you try to setup virtual hosts.
# You may use the command line option '-S' to verify your virtual host
# configuration.
&VirtualHost *:80&
ServerAdmin admin@example.com
# 虚拟主机路径
DocumentRoot "F:/PhpProject"
# 虚拟主机域名或IP
ServerName 127.0.0.1
# 虚拟主机域名或IP(别名或第二个域名)
ServerAlias localhost
# 错误日志
ErrorLog "logs/dummy-host.localhost-error.log"
CustomLog "logs/dummy-host.localhost-access.log" combined
#------------------------------------------------------------------
# 主目录配置权限
#------------------------------------------------------------------
&Directory /&
# 列出目录资源
Options Indexes FollowSymLinks
# 禁止列出目录资源
#Options FollowSymLinks
AllowOverride All
Order allow,deny
Allow from all
&/Directory&
#------------------------------------------------------------------
# 虚拟目录配置
# 以下别名配置意思是配置一个：http://localhost/p 的虚拟目录
#------------------------------------------------------------------
Alias /p "F:/PhpProject/ZendHello"
&Directory "F:/PhpProject/ZendHello"&
# 列出目录资源
Options Indexes FollowSymLinks
# 禁止列出目录资源
#Options FollowSymLinks
AllowOverride All
Order allow,deny
Allow from all
&/Directory&
&/VirtualHost&
其中，DocumentRoot是php源码的目录。
打开php的解压目录，将php.ini-Deployment重命名为：php.ini
修改extension_dir为：
extension_dir = "D:/Program Files/php5.6.9/ext"
修改extension：
extension=php_bz2.dll
extension=php_curl.dll
extension=php_fileinfo.dll
extension=php_gd2.dll
extension=php_gettext.dll
extension=php_gmp.dll
extension=php_intl.dll
extension=php_imap.dll
;extension=php_interbase.dll
extension=php_ldap.dll
extension=php_mbstring.dll
extension=php_exif. Must be after mbstring as it depends on it
extension=php_mysql.dll
extension=php_mysqli.dll
;extension=php_oci8_12c. Use with Oracle Database 12c Instant Client
extension=php_openssl.dll
;extension=php_pdo_firebird.dll
extension=php_pdo_mysql.dll
;extension=php_pdo_oci.dll
extension=php_pdo_odbc.dll
extension=php_pdo_pgsql.dll
;extension=php_pdo_sqlite.dll
extension=php_pgsql.dll
;extension=php_pspell.dll
extension=php_shmop.dll
; The MIBS data available in the PHP distribution must be installed.
; See http://www.php.net/manual/en/snmp.installation.php
;extension=php_snmp.dll
;extension=php_soap.dll
;extension=php_sockets.dll
extension=php_sqlite3.dll
;extension=php_sybase_ct.dll
;extension=php_tidy.dll
;extension=php_xmlrpc.dll
;extension=php_xsl.dll
修改date.timezone:
date.timezone = Asia/Shanghai
将apache设置为windows service方法：
到apache的bin目录（使用管理员身份运行cmd），运行命令：
httpd.exe -k install
然后双击运行ApacheMonitor.exe即可。
卸载服务方法是：
httpd.exe -k uninstall
在F:\PhpProject目录下面新建一个文件：index.php
phpinfo();
将看到如下：
文章参考：
Windows下搭建PHP开发环境
手动将Apache注册为系统服务
阅读(...) 评论()}